Ecollector Pre-engineered Baghouse Archives - ÍøÆØ³Ô¹Ï. /category/industrial-dust-collectors/ecollector-pre-engineered-baghouse/ Custom Industrial Ventilations Systems Fri, 20 Nov 2026 20:12:38 +0000 en-US hourly 1 https://wordpress.org/?v=7.1.5 /wp-content/uploads/2020/08/Favicon-6.png Ecollector Pre-engineered Baghouse Archives - ÍøÆØ³Ô¹Ï. /category/industrial-dust-collectors/ecollector-pre-engineered-baghouse/ 32 32 Types of Industrial Baghouse Dust Collectors /industrial-baghouse-dust-collector-types-and-how-they-work/ Thu, 06 Apr 2017 14:56:44 +0000 /?p=6228 What is an industrial baghouse dust collector? An industrial baghouse dust collector, when coupled with an industrial blower, pulls in airborne dirt, and other particulate matter generated by manufacturing processes. The baghouse dust collector then cleans the air by filtering out floating dust and dirt. Once clean and free of contaminants, the dust collector allows...

The post Types of Industrial Baghouse Dust Collectors appeared first on ÍøÆØ³Ô¹Ï..

]]>

What is an industrial baghouse dust collector?

An industrial baghouse dust collector, when coupled with an industrial blower, pulls in airborne dirt, and other particulate matter generated by manufacturing processes.

The baghouse dust collector then cleans the air by filtering out floating dust and dirt. Once clean and free of contaminants, the dust collector allows the air to move through the baghouse and be released either back into the manufacturing space or into the atmosphere.

baghouse graphic

Types of industrial baghouse dust collectors:

After learning about your facility, regulatory requirements and particulate matter you need to filter, the ÍøÆØ³Ô¹Ï team taps decades of experience to identify the industrial baghouse dust collector that’s right for you. Here are the types of baghouses we consider:

Pulse Jet Baghouse Dust Collector

In pulse jet baghouse dust collector operation, puffs of pressurized air “pulse� incoming air through the filters for cleaning. Pulse jet dust collectors are the most common type of baghouse dust collector used in industry today.

Reverse Air Baghouse Dust Collector

Industrial reverse air baghouse dust collectors are typically used in wood dust applications with larger chips or when particulate matter has low densities and/or large aspect ratios. Reverse air baghouse operation involves a low-pressure reversed flow to backflush the air through the filter bags. Once backflushed, the filtered air is released back into the environment for recirculation.

Shaker Baghouse Dust Collector

Industrial shaker dust collectors are occasionally used for areas and facilities where it’s not practical to have compressed air. Mechanical shaker baghouses remove particles by mechanically shaking the filter bags. This causes the heaviest pieces to fall into a hopper while the smaller pieces are stuck against the inside or outside of the bags, depending on the design.

Shaker baghouse dust collectors are nearly obsolete and have limited applications due to required regulatory efficiencies and necessary maintenance.

Custom Design Baghouse Dust Collector Capabilities

Whether your facility requires a reverse air or pulse jet baghouse dust collector, ÍøÆØ³Ô¹Ï has a custom design-build department which allows us to conduct both engineering and custom design in-house for any type of industrial baghouse dust collector. We can design a unique baghouse to fit your needs according to regulatory emission rates, particle type, explosion protection guidelines, the size and type of your facility and air-to-cloth ratios.

Put a Custom Baghouse Dust Collector to Work for You

Understanding what an industrial baghouse dust collector is and how it works is the first step. If you’re ready for an industrial baghouse design that caters to your facility’s requirements, complete the form below.

The post Types of Industrial Baghouse Dust Collectors appeared first on ÍøÆØ³Ô¹Ï..

]]>
Planning for a new dust collector installation /planning-industrial-dust-collection-system-redesign/ Tue, 12 Jul 2016 18:40:06 +0000 /?p=5590 When a new dust collector installation occurs, the installation may alter hood and duct flow rates. Therefore, it is imperative to consider the installation’s effects, in order to reduce worker safety risk and ensure continued compliance with environmental regulations. We explain what to consider before undertaking a new dust collector installation, such as: Whether adding...

The post Planning for a new dust collector installation appeared first on ÍøÆØ³Ô¹Ï..

]]>
When a new dust collector installation occurs, the installation may alter hood and duct flow rates. Therefore, it is imperative to consider the installation’s effects, in order to reduce worker safety risk and ensure continued compliance with environmental regulations. We explain what to consider before undertaking a new dust collector installation, such as:

  • Whether adding new equipment or improving efficiency is the reason behind the installation
  • Evaluating duct network, fans, dust collector and baghouse efficiency
  • What ÍøÆØ³Ô¹Ï will evaluate and the different areas an industrial dust collector manufacturer can help in

Reasons to consider a new dust collector installation

Facility managers may consider a new dust collector installation for two primary reasons:

  • New equipment: Adding equipment likely will add to the amount of particulate sources that need to be collected.
  • Improve efficiency: Oftentimes, dust collection systems become inefficient, leaving behind particulates that should be collected. If maintenance issues are ruled out, a new dust collector installation can help improve the overall performance of the dust collection system.

Evaluating whether you need a new dust collector installation

When considering a new dust collector installation, the first step is conducting an evaluation of the current system. This evaluation will determine the system’s current capacity and what modifications need to be made to keep the system running efficiently.

The following areas are evaluated:
  • Duct network: Ducts are examined to measure flow volumes, velocities, static pressures and physical wear and appearance. This network also is inspected for dropout.
  • Fans: Fans are examined to determine flow rates, rpm and system static pressure. Based on the findings and needs of the collection system, fans may need to be resized or resheaved to change fan rpm. In addition, a motor change may be necessary to meet required fan speed or necessary static pressure.
  • Dust collector: The size of the dust collector indicates whether it has the capacity to pick up contaminants from needed areas. This capacity may need to be increased if more particulate is required to be removed from the area.
  • Baghouse efficiency: The evaluation determines whether the baghouse has adequate air-to-cloth ratio to capture particulate efficiently.

ÍøÆØ³Ô¹Ï’s evaluation

ÍøÆØ³Ô¹Ï, an industrial dust collector manufacturer, has the engineering resources to conduct a thorough evaluation of your industrial air ventilation system. If you are experiencing inefficiencies in your system, we’ll determine whether you have a maintenance issue or whether you need a new dust collector installation.

If it’s a maintenance issue, we can set up a regular maintenance schedule at your facility to ensure your system is running at peak efficiency. Because we’re an industrial dust collector manufacturer, we can also provide a turnkey solution, from evaluation to design and build, if you’re adding equipment.

Contact ÍøÆØ³Ô¹Ï to learn more about installing a new dust collector for your facility.

 

The post Planning for a new dust collector installation appeared first on ÍøÆØ³Ô¹Ï..

]]>
Setting up and troubleshooting your pulse controller /troubleshooting-pulse-controller/ Thu, 16 Jun 2016 13:30:53 +0000 /?p=5537 Baghouse filters are cleaned when compressed air is blown into the filter to release dust buildup. A pulse controller times the burst of compressed air that is used to clean baghouse filters, a practice that improves baghouse efficiency and increases bag life. Types of pulse controllers Pulse controllers come in two types—a simple timer and...

The post Setting up and troubleshooting your pulse controller appeared first on ÍøÆØ³Ô¹Ï..

]]>
Baghouse filters are cleaned when compressed air is blown into the filter to release dust buildup. A pulse controller times the burst of compressed air that is used to clean baghouse filters, a practice that improves baghouse efficiency and increases bag life.

Types of pulse controllers

Pulse controllers come in two types—a simple timer and an on-demand timer.

  • Simple timer: With this pulse controller, an operator sets a timer for how often the pulse valve will pulse. With this type of controller, the bags are cleaned at the set interval even if they do not need cleaning. Typically, trial and error is used to set the frequency. This pulse controller is a lower cost option because its design is simple, and it is easier to set up. This controller works best with predictable or consistent loading, and it’s ideal for baghouses that need to be cleaned continuously.
  • On-demand timer: For this pulse controller, the timer reads the differential pressure across the baghouse and initiates a pulse sequence once the differential pressure reaches a high set point. It continues to pulse until the pressure across the baghouse reaches the low set point. Once at the low set point, pulsing stops until the differential pressure reaches the high set point, and the sequence continues. Because filters are cleaned when needed, the advantages of an on-demand pulse controller are extended bag life and savings in compressed air.

Set up parameters for pulse controllers

Several parameters can be set on pulse controllers.

The simple timer has just two:

  • Time the valve is open: This time correlates to how much volume of compressed air is released through the valve. A quick pop of air, for example, is just .05 of a second.
  • Time the valve is closed: This is the amount of time between pulses. It can typically be set to anywhere from one second to several hundred seconds.

Besides high and low pressure, as well as those listed above, the on-demand timer also has the following parameters:

  • Alarm pressure: Alarms can be set to tell an operator there is an issue with a bag. A high pressure alarm indicates a plugged bag. As an example, a high pressure set point may be six, and an alarm may be set for nine or 10. Conversely, a low pressure alarm indicates a bag needs to be replaced because of a leak or a bag has fallen off.
  • Pulse sequencing: Operators can set the order that the valves release air. ÍøÆØ³Ô¹Ï’s Ecollectorâ„¢, for example, can have six to 16 valves, which can be programmed in sequence.

As an added note, when installing a pulse controller, avoid locations with direct sunlight or in close proximity to heat or an electromagnetic field as these can damage the controller.

Troubleshooting your pulsing system

If you experience issues with the pulse controller, there are several things you can check, depending upon the problem:

  • Valves are not pulsing: Check the power to the timer, the differential pressure switch, header pressure, or the solenoid and/or diaphragm valve.
  • Hissing sound from valves: This may indicate a possible compressed air leak.
    • If the solenoid air outlet is leaking, check:
      • The electrical connection
      • The sub assembly for debris
    • If the diaphragm valve outlet port is leaking, check:
      • The air line to the solenoid
      • Header pressure
      • The inside valve body for pitting and debris
      • The membrane for wear
  • Bags are not cleaning adequately: Check the pulse pressure, on-time and off-time, and pressure set points. It may also indicate the need for a bag change.

We also recommend that you keep an adequate supply of dust collector filters and pulse valve kits on hand to avoid the cost that comes with having delays in production.

ÍøÆØ³Ô¹Ï can help with your pulse controller setup or troubleshooting. Contact us for assistance.

The post Setting up and troubleshooting your pulse controller appeared first on ÍøÆØ³Ô¹Ï..

]]>
Planning for a Dust Collection System /dust-collection-system-budget-checklist/ Fri, 30 Jan 2015 04:31:12 +0000 ?p=4446 We’ve put together a handy checklist to help you set a budget for a dust collection system. Everything from your dust collection system’s location to regulatory requirements and decisions about filters, waste discharge, stacks and fans will affect the overall budget. System testing and maintenance requirements are other factors that need to be considered. This checklist breaks down...

The post Planning for a Dust Collection System appeared first on ÍøÆØ³Ô¹Ï..

]]>
We’ve put together a handy checklist to help you set a budget for a dust collection system. Everything from your dust collection system’s location to regulatory requirements and decisions about filters, waste discharge, stacks and fans will affect the overall budget. System testing and maintenance requirements are other factors that need to be considered. This checklist breaks down the main considerations for your budget calculations.

Download Dust Collection Planning

The post Planning for a Dust Collection System appeared first on ÍøÆØ³Ô¹Ï..

]]>
Dust Collection System Considerations – Part 2 /dust-collection-system-considerations-part-2/ Tue, 23 Sep 2014 22:04:03 +0000 ?p=4230 Construction, Start-Up, Training & Maintenance Phases Building and Managing a Dust Collection System Many factors affect the performance of Dust Collection Systems. In a previous blog post, Dust Collection System Design Considerations – Part 1, we summarized five key considerations for the engineering and design phase of a dust collection system. The post was based...

The post Dust Collection System Considerations – Part 2 appeared first on ÍøÆØ³Ô¹Ï..

]]>
Construction, Start-Up, Training & Maintenance Phases

Building and Managing a Dust Collection System

Many factors affect the performance of Dust Collection Systems. In a previous blog post, Dust Collection System Design Considerations – Part 1, we summarized five key considerations for the engineering and design phase of a dust collection system. The post was based on an Engineers Collaborative article that no longer is available online.

For this post, we return to that article to summarize its advice for managing the following phases of a dust collection project:

  • Construction
  • Startup
  • Training
  • Maintenance

The Construction Phase

Appropriately detailed engineering and design documents produced in the design phase help ensure the construction phase meets design intent, reducing future operating and maintenance problems.

During the construction phase, you should:

  • Conduct fabrication checks: Inspect components for proper construction and gauge as they are being made, not just before they are shipped.
  • Inspect the ventilation and exhaust system:
    • Make sure components do not block access to each other or to other plant services and equipment.
    • Repair or replace components damaged during shipping or installation.
    • Protect dust collector filters from weather and construction activities.
    • Before startup, ensure your ventilation or exhaust system satisfies engineering and design documents.

The Start-Up Phase

These elements need to be validated at startup:

  • Airflow in the duct system: The dust capture hoods should exhaust the designed air quantities, according to standards in the Industrial Ventilation Manual published by the . The data collected during this air system balancing becomes the project’s baseline information.
  • Industrial ventilation system safety components: Check that fire and explosion protection components, pressure gauges, and low-flow and over-pressure alarm systems are set up as intended in the engineering and design documents.
  • Component baseline documentation: Record baseline information for all other system components, including dust capture hood static, dust collector and safety monitoring filter system (HEPA) static pressures, and main duct velocity pressure to ensure it complies with the level recorded in your state permit application.
  • Industrial hygiene particulate air sampling: Monitor air for particulates to ensure that dust sources are controlled to the desired level. Make modifications to the dust control system components as needed and then update component baseline documentation.

Staff Training

Plant supervisory, production and maintenance personnel should be trained in the following areas:

  • Safety features and components
  • Air meter read-outs and alarms
  • Baseline documentation for components
  • Operating and maintenance instructions and recommendations
  • Operation and use of dust capture hoods and dampers
  • Preventive maintenance

Preventative Maintenance Activities

Component repair activities include greasing fan bearings and emptying dust collector hoppers on schedule, replacing obsolete dust capture hoods and ductwork, and repairing damaged dust control system components. However, these and other component repair activities should be supported by four critical activities:

1. Check system operating characteristics: Periodically inspect the system visually and ensure components’ operating characteristics, such as static and velocity pressures, meet standards set during the start-up phase. Analyze and correct any deviations.

2. Inspect explosion protection components: Inspect explosion relief or suppression systems to ensure they comply with manufacturers’ recommendations and applicable safety guidelines.

3. Consider the effect of product changes: Include maintenance personnel in new product discussions as changes to the processed dust can affect the dust control exhaust system’s performance.

4. Sample air for particulates: Periodic air sampling should be performed to ensure the dust control system is meeting standards set during the start-up phase. Investigate any deviations you find.

ÍøÆØ³Ô¹Ï performs all aspects related to the construction, start-up, training and maintenance of industrial ventilation systems to ensure customized dust collection systems operate at optimal performance.

Contact us for more information.

The post Dust Collection System Considerations – Part 2 appeared first on ÍøÆØ³Ô¹Ï..

]]>
Dust Collection Systems Considerations – Part 1 /dust-collection-system-design/ Thu, 05 Jun 2014 23:17:49 +0000 ?p=4169 Dust Collection Systems Are Complex Many factors impact the overall effectiveness of the system. In order to ensure your dust collection system reaches peak performance, it’s critical to have the proper groundwork in the engineering and design phase. In the article, Guidelines for Operating and Maintaining Industrial Dust Control Exhaust Systems, the Engineers Collaborative identifies...

The post Dust Collection Systems Considerations – Part 1 appeared first on ÍøÆØ³Ô¹Ï..

]]>
Dust Collection Systems Are Complex

Many factors impact the overall effectiveness of the system. In order to ensure your dust collection system reaches peak performance, it’s critical to have the proper groundwork in the engineering and design phase.

In the article, the Engineers Collaborative identifies and summarizes five key considerations for the engineering and design phase. ÍøÆØ³Ô¹Ï takes each of these into account when we are developing custom solutions for our clients and is capable of performing all aspects related to industrial ventilation system design and engineering.

Key Considerations for Industrial Ventilation

  • Provide detailed dust collection system engineering and design documents.
    Outline detailed engineering specifications and design documents, including design drawings. Inadequate engineering and design documents may add construction costs and lead to a poorly installed system.
  • Specify the right construction materials.
    Identify the right materials for construction—for example, if you are removing corrosive dusts, you’ll want to use stainless steel rather than mild steel.
  • Think about component location.
    Component location is often overlooked, but the system needs to be strategically placed to accommodate inspection and repair.
  • Outline dust collection system component specifications.
    Be comprehensive in the systems approach and specify all components, including dust collectors, exhaust fans and other OEM components that are needed.
  • Identify services and support for ventilation equipment.
    Engineering, design, fabrication and installation representatives should be available to address immediate issues in future operations and maintenance emergencies. Seek to hire firms that provide the dedicated personnel and teams in every phase of the system’s development.

Dust Collection System Considerations: Next Steps

These are only the guidelines for the engineering and design phase. A future blog post will review considerations for construction, start-up, training and maintenance. But with proper preparation to engineering and design, you’ll have a head start in making sure your dust collection system reaches optimal performance.

The post Dust Collection Systems Considerations – Part 1 appeared first on ÍøÆØ³Ô¹Ï..

]]>